JIS G 3445 Grade STKM11A Steel Tube, stkm11a Chemical Composition, stkm11a equivalent material, stkm11a material properties, stkm11a yield strength, STKM 11A Steel Tube Supplier.
Amardeep Steel Centre is a reputed STKM11A cold rolled tube manufacturer and supplier across the country. JIS G3445 STKM11A is the standard material used for carbon seamless steel tubing in mechanical parts. These low carbon steel pipes have a maximum carbon content of 0.12% and a maximum manganese content of 0.60%, making them easy to shape and form. They are also commercially referred to as CS pipes or MS pipes. Compared to high carbon steel pipes, low carbon steel pipes have superior mechanical properties and lower levels of sulfur, phosphorus, and other impurities.
JIS G 3445 Grade STKM 11A Carbon Steel Seamless Tubes, also known as mild steel pipes and tubes, are low-cost
tubes with a maximum carbon content of 0.12% and a maximum manganese content of 0.60%. These tubes are easy to form and shape and are manufactured according to JIS specifications. They are commercially referred to as CS pipes or MS pipes. Compared to high carbon steel pipes, low carbon steel pipes are not as hard, although their surface hardness can be increased through carburizing.
JIS G3445 STKM11A steel contains a small amount of silicon (Si) and manganese (Mn) in addition to carbon (C) and deoxidation (usually not more than 0.80%, up to 1.20%). This steel must have a chemical composition as well as mechanical qualities. The concentration of sulfur (S) and phosphorus (P) impurities is typically kept below 0.035%. High-quality steel has P and S controlled below 0.025% and 0.020%, respectively, and its grade should be appended with "E" for distinction. Other residual alloy elements introduced into steel by raw materials, such as chromium (Cr), nickel (Ni), and copper (Cu), are typically managed to be less than 0.25% chromium, 0.30% nickel, and 0.25% copper. Some brands of manganese (Mn) steel have a manganese (Mn) content of 1.40%.
JIS G3445 STKM11A steel is widely used due to its high production and cost-effectiveness. It can be forged into various shapes such as round, square, and flat sections, plates, and seamless steel tubes. The steel is commonly used in the manufacturing of general structural and mechanical structural parts, building structural components, and pipes for fluid conveyance. Depending on the application, heat treatment such as normalizing or quenching may be necessary.
JIS G 3445 Grade STKM 11A Specification :
| Standard | JIS G3445 |
| Description Name | STKM 11A Steel tube, STKM 12A steel tubes, STKM 12C steel tubes, STKM 13A steel tubes, STKM 13C steel tubes |
| Size | 6mm-340mm |
| Wall Thickness | 1mm-50mm |
| Shape | Round |
| Production Type | Cold drawn, cold rolled or hot rolled |
| Length | Single random length/ Double random length or as customer’s actual request max length is 10m |
| Grade | STKM 11A, STKM 12A, STKM 12C, STKM 12B, STKM 13A, STKM 13B, STKM 13C, STKM 15A, STKM 17A |
JIS G 3445 Grade STKM11A Chemical Composition
| C | Si | Mn | P | S |
| max 0.12 | max 0.35 | max 0.6 | max 0.04 | max 0.04 |
JIS G 3445 Grade STKM11A Mechanical Properties
| Assortment | Yield point or Proof stress | Tensile strength | Elongation | Reduction of area | Charpy impact strength |
| - | N/mm 2 | N/mm 2 | % | % | J/cm 2 |
| Tubes | 290 | 35 |
STKM11A Physical Properties
| Tensile strength | 115-234 | σb/MPa |
| Yield Strength | 23 | σ 0.2 ≥/MPa |
| Elongation | 65 | δ5≥ (%) |
| ψ | - | ψ≥ (%) |
| Akv | - | Akv≥/J |
| HBS | 123-321 | - |
| HRC | 30 | - |
JIS G 3445 Grade STKM11A Tolerance on Outside Diameter
| Division | Tolerances on outside diameter |
| No. 1 | Under 50mm ±0.5mm |
| 50mm or over ±1% | |
| No. 2 | Under 50mm ±0.25mm |
| 50mm or over ±0.5% | |
| No. 3 | Under 25mm ±0.12mm |
| 25mm or over to and excl. 40mm ±0.15mm | |
| 40mm or over to and excl. 50mm ±0.18mm | |
| 50mm or over to and excl. 60mm ±0.20mm | |
| 60mm or over to and excl. 70mm ±0.23mm | |
| 70mm or over to and excl. 80mm ±0.25mm | |
| 80mm or over to and excl. 90mm ±0.30mm | |
| 90mm or over to and excl.100mm ±0.40mm | |
| 100mm or over ±0.50% |
Tolerance of Thickness
| Division | Tolerances on wall thickness |
| No. 1 | Under 4mm |
| +0.6mm | |
| -0.5mm | |
| 4mm or over | |
| 15% | |
| -12.50% | |
| No. 2 | Under 3mm |
| ±0.3mm | |
| 3mm or over |
STKM11A Heat Treatment Regime
| Annealing | Quenching | Tempering | Normalizing | Q & T |
| √ | √ | √ | √ | √ |
STKM11A Range of Products
| Product type | Product | Dimension | Processes | Deliver Status |
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACIDWASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & H | Annealed, Solution and Aging, Q+T, ACIDWASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACIDWASHED |
STKM11A Application & Use
JIS G3445 STKM11A steel tubes are commonly used in a wide range of applications in the automotive industry, machinery manufacturing, and other industrial sectors where high strength and durability are required. These steel tubes are ideal for manufacturing machine parts, mechanical parts, and vehicle components such as shock absorbers, steering shafts, and drive shafts. They are also used in construction, including for the fabrication of steel structures, such as buildings, bridges, and towers. Additionally, STKM11A steel tubes are suitable for use in fluid transfer applications, such as hydraulic lines, and are commonly used in the manufacturing of bicycle frames and other sporting equipment.
We Supply JIS G 3445 Grade STKM11A in listed cities in India
Mumbai, Lucknow, Coimbatore, Imphal, Mysore, Ratlam, Delhi, Kanpur, Darjeeling, Jalandhar, Nagpur, Solapur, Kolkata, Allahabad, Dehradun, Jammu, Nashik, Srinagar, Chennai, Ahmedabad, Faridabad, Jamshedpur, Bhadravati, Chattisgarh, Durgapur, Asansol, Hospet, Bellary, Visakhapatnam, Nellore, Surat, Bangalore, Chandigarh, Ghaziabad, Jhansi, Patna, Siliguri, Hyderabad, Stainless Steel Pipe dealers in Salem, Amritsar, Noida, Kochi (Cochin), Mangalore, Indore, Vadodra, Bhubaneswar, Bikaner, Bhavnagar, Tirupur, Ankleshwar, Warangal, Agartala, Thoothukudi, Stainless Steel Pipe suppliers in Pune, Thiruvanthapuram, Jaipur, Aizawl, Guwahati, Kozhikode, Raipur, Vishakhapatnam, Jabalpur, Bhopal, Gwalior, Ludhiana, Rajahmundry, Thane, Agra, Bhubaneshwar, Gurgaon, Madurai, Rajkot, Varanasi, Bhilai, Haridwar, Meerut, Ranchi, Ahmednagar, Akola, Amravati, Aurangabad, Baramati, Beed, Bhandara, Bhiwandi, Buldhana, Chandrapur, Chimur, Dahanu, Dhule, Dindori, Erandol, Gadchiroli, Hatkanangle, Hingoli, Ichalkaranji, Jalgaon, Jalna, Karad, Khed, Yavatmal, Kolaba, Kolhapur, Kopargaon, Latur, Malegaon, Mumbai, Nagpur, Nanded, Nandurbar, Nashik, Osmanabad, Pandharpur, Parbhani, Rajapur, Ramtek, Ratnagiri, Raver, Sangli, Satara, Shirdi, Shirur, Solapur, Thane, Wardha, Washim, Andhra Pradesh, Jammu and Kashmir, Nagaland, Uttarakhand, Haryana, Lakshadweep, Arunachal Pradesh, Jharkhand, Odisha, West Bengal, Himachal Pradesh, Assam, Karnataka, Punjab, Andaman and Nicobar Islands, Puducherry, Bihar, Kerala, Rajasthan, Chandigarh, Meghalaya, Chhattisgarh, Madhya Pradesh, Sikkim, Dadar and Nagar Haveli, Mizoram, Goa, Maharashtra, Tamil Nadu, Daman and Diu, Tripura, Gujarat, Manipur, Telangana, Delhi, Uttar Pradesh in India.
We Export JIS G 3445 Grade STKM11A in listed Country
United States of America, Malaysia, UAE, Indonesia, Saudi Arabia, Iran, Qatar, India, China, United Kingdom, Singapore, Canada, Thailand, South Korea, Turkey, Philippines, Egypt, Germany, Italy, Japan, Russia, Vietnam, Australia, South Africa, Portugal, Morocco, Costa Rica, Kazakhstan, Netherlands, Mexico, Brazil, France, Spain, Taiwan, Nigeria, Bangladesh, Kuwait, Iraq, Ukraine, Poland, Jordan, Romania, Oman, Hong Kong, Venezuela, Colombia, Norway, Chile, Trinidad & Tobago, Greece, Czechia, Belgium, Sri Lanka, Cyprus, Angola, Myanmar (Burma), United Kingdom, Canada, South Korea, Thailand, Netherlands, Spain, Turkey, Australia, Mexico, Pakistan, Vietnam, Brazil, Philippines, France, Taiwan, Poland, South Africa, Russia, Nigeria, Kuwait, Czechia, Norway, Romania, Egypt, Oman, Sweden, Belgium, Hong Kong, Israel, Colombia, Switzerland, Denmark, Finland, Argentina, Venezuela, Peru, Ukraine, Chile, Bangladesh, Portugal, Ireland, Austria, Algeria, Greece, Iraq, New Zealand, Slovakia, Hungary, Kazakhstan, Slovenia, Lithuania, Serbia, Sri Lanka, Bahrain, Bulgaria, Morocco, Tunisia, Croatia, Jordan, Ecuador, Trinidad & Tobago, Estonia, Azerbaijan, Ghana, Lebanon, Cyprus, Dominican Republic, Latvia, Libya, Costa Rica, Cambodia, Macedonia (FYROM), Belarus, Jamaica, Palestine, Turkmenistan
