ASTM A 333 Gr 6 Low-Temperature Carbon Steel Pipe & Tubes

ASTM A 333 Gr 6 Carbon Steel Pipes & Tubes Manufacturer, Exporter & Suppliers

ASTM A 333 Gr 6 Low Temperature Carbon Steel Pipe & Tubes

ASTM A333 Grade 6 Pipe is a carbon steel pipe that comes under ASTM, ASME, and API standards. There are grades 1 through 11 in the pipe series and the sizes range from ½ inches to 36 inches. The wall thickness of the pipes ranges from 3mm to 12mm and the ASME SA 333 GR 6 Seamless Pipe comes under different schedules such as sch40, sch80, and up to XXS including all schedules.

The cold drawn and cold rolled pipe types are available. There are seamless, welded, ERW, and fabricated pipes. The seamless pipes are drawn from a single billet of the material whereas the ASTM A333 Grade 6 Welded Pipe Specification mandates it be welded from a strip or sheet of the same material grade. The form of the pipes can vary, such as round or hydraulic, in most cases.

Amardeep Steel is a leading manufacturer and supplier of these A333 Grade 6 Pipe types in varying wall thicknesses as well. The wall thicknesses range from 3mm to 12mm in different schedules. ASTM A333 Grade 6 Pipe is a carbon steel material intended for low-temperature applications. The standards and grades vary according to the application requirements. ASTM A333 Pipe ranges in diameter from ½ inches to 36 inches. The schedules range from sch40 through XXS and all schedules are according to the customer requirements. There are cold-drawn and cold-rolled A333 Seamless Pipe types. ASTM A333 Pipe can come in seamless, ERW, welded, fabricated, and CDW types. The forms of the pipes vary from round to hydraulic. The Ltcs ASTM A333 Gr 6 comes in different lengths from 3m to 18m depending on the custom requirements of the applications. The pipe ends also differ in terms of different operation types. The SA333 Pipe can have a plain end, beveled end, or threaded end type.

Since these are low-carbon materials, A333 Gr 6 Material need to be preheated before welding. The preheating allows the ASTM A333 Pipe to have enough ductility to not develop welding cracks. The applications of the pipes are seen primarily in the oil and gas industry, petroleum industry, and oil and gas transmission lines. ASTM A333 pipes are also found in structural applications such as the construction industry.

Our A333 Gr 6 Material is of high standard and it undergoes all the testing necessary to make sure of the quality. ASTM A333 pipes can come in different diameters and wall thicknesses. The wall thickness can range from 3mm to 12mm and there are different schedules to cope with different pressure requirements. The schedules of the SA333 Pipe range from 40 to SCH XXS and all schedules. We can produce any custom-made ASTM A333 Pipe components for our customers. Our pricing is also competitive to the market.

A333 Gr 6 Pipe Specification

Type Seamless / SAW / ERW / Spiral weld / Fabricated / Welded
Grade Low Temperature Seamless Pipe: ASTM A333 Gr. 6
Size 1/8″NB TO 30″NB IN
Specialized in Large Diameter Size
Schedule SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Form Round, Square, Rectangular, Hydraulic Etc.
Length Single Random, Double Random & Cut Length
Additional Testing NACE MR0175, NACE TM0177, NACE TM0284, HIC TEST, SSC TEST, H2 SERVICE, etc.

A333 Gr 6 Chemical Composition

ASTM A333 Grade 6 Carbon Steel Seamless Pipes are low carbon steel pipes with a max 0.30 % carbon content and a combination of 0.29 – 1.06 % manganese. ASTM A333 Grade 6 Pipes are ductile and strong Pipes with long-wearing properties.

Carbon Silicon Manganese Phosphorous Sulphur Molybdenum Nickel Chromium Copper Others
max 0.30 min 0.10 0.29 – 1.06 0.025 0.025

A333 Gr 6 Mechanical Properties

Grade Yield strength, min, psi (MPa) Tensile strength, min, psi (MPa) Elongation (%)
A333 Gr.6 35 000 (240) 60 000 (415) 30 min

A333 Grade 6 Pipe Physical Properties

Density (lb / cu. in.) 0.284
Specific Gravity 7.9
Specific Heat (Btu/lb/Deg F - [32-212 Deg F]) 0.105
Melting Point (Deg F) 2750
Thermal Conductivity 360
Mean Coeff Thermal Expansion 6.3
Modulus of Elasticity Tension 30
Modulus of Elasticity Torsion 11

Astm A333 Gr 6 Equivalent Grade

Former New
Execution Standard Material Standard Material
Seamless ASTM A333 GRADE 6 EN 10216-4 P265NL

A333 Grade 6 Pipe Wall Thickness

ASTM A333 Grade 6 Pipe Types Out diameter Wall thickness Length
A333 Grade 6 Seamless Pipe (Custom Sizes) 1/2" NB – 60" NB SCH 5 / SCH 10 / SCH 40 / SCH 80 / SCH 160 Custom
Welding A333 Grade 6 Pipe (in Stock + Custom Sizes) 1/2" NB – 24" NB As per requirement Custom
ASTM A333 Grade 6 ERW Pipe (Custom Sizes) 1/2" NB – 24" NB As per requirement Custom
ASTM A333 Grade 6 SAW Pipe 16" NB – 100" NB As per requirement Custom

ASTM A333 Gr 6 Pipe Weight Chart

Size NPS Pipe O.D. Wall Thickness Pipe I.D. Weight per Foot Standard to XXHY Schedule Pipe # Section Modulus Gallon Capacity Per Linear Foot
1/2 0.84 0.109 0.622 0.85 STD 40 .0407 .0158
    0.147 0.546 1.09 XHY 80 .0478 .0122
    0.188 0.464 1.31   160 .0528 .0088
    0.294 0.252 1.72 XXHY   .0577 .0026
3/4 1.05 0.113 0.824 1.13 STD 40 .0705 .0277
    0.154 0.742 1.48 XHY 80 .0853 .0225
    0.219 0.612 1.95   160 .1006 .0153
    0.308 0.434 2.44 XXHY   .1103 .0077
1 1.315 0.133 1.049 1.68 STD 40 .1328 .0449
    0.179 0.957 2.17 XHY 80 .1606 .0374
    0.250 0.815 2.85   160 .1904 .0271
    0.358 0.599 3.66 XXHY   .2136 .0146
1 1/4 1.66 0.140 1.380 2.27 STD 40 .2346 .0777
    0.191 1.278 3.00 XHY 80 .2913 .0666
    0.250 1.160 3.77   160 .3421 .0549
    0.382 0.896 5.22     .4110 .0328
1 1/2 1.90 0.145 1.610 2.72 STD 40 .3262 .1058
    0.200 1.500 3.63 XHY 80 .4118 .0918
    0.281 1.338 4.86   160 .5079 .0730
    0.400 1.100 6.41     .5977 .0494
2 2.375 0.109 2.157 2.64   10 .4205 .1898
    0.154 2.067 3.66 STD 40 .5606 .1743
    0.218 1.939 5.03 XHY 80 .7309 .1534
    0.250 1.875 5.68     .8045 .1434
    0.281 1.813 6.29     .8666 .1344
    0.344 1.687 7.47   160 .9806 .1161
    0.436 1.503 9.04 XXHY   1.1043 .0922
2 1/2 2.875 0.120 2.635 3.53   10 .6870 .2833
    0.203 2.469 5.80 STD. 40 1.0640 .2487
    0.216 2.443 6.14     1.1169 .2435
    0.250 2.375 7.02     1.2468 .2301
    0.276 2.323 7.67 XHY 80 1.3386 .2202
    0.375 2.125 10.02   160 1.6371 .1842
    0.552 1.771 13.71 XXXHY   1.9971 .1280
3 3.50 0.120 3.260 4.34     1.0411 .4336
    0.156 3.188 5.58     1.3122 .4147
    0.172 3.156 6.12     1.4265 .4064
    0.188 3.124 6.66     1.5342 .3984
    0.216 3.068 7.58 STD. 40 1.7241 .3840
    0.250 3.000 8.69     1.9372 .3672
    0.281 2.938 9.67     2.1207 .3521
    0.300 2.900 10.26 XHY 80 2.2253 .3431
    0.438 2.624 14.34   160 2.8774 .2811
    0.600 2.300 18.6 XXHY   3.4243 .2158
3 1/2 4.0 0.120 3.760 4.98   10 1.3776 .5768
    0.226 3.548 9.12 STD. 140 2.3939 .5136
    0.250 3.500 10.02     2.6001 .4998
    0.281 3.438 11.17     2.8562 .4821
    0.318 3.364 12.52 XHY 80 3.1400 .4617
    0.636 2..728 22.87 XXHY   4.8795 .3085
4 4.5 0.120 4.260 5.62   10 1.7612 .7404
    0.156 4.188 7.24     2.2354 .7156
    0.188 4.124 8.67     2.6296 .6942
    0.203 4.094 9.32     2.8173 .6838
    0.219 4.062 10.02     3.0184 .6725
    0.237 4.026 10.80 STD. 40 3.2145 .6613
    0.250 4.000 11.36     3.3611 .6528
    0.281 3.938 12.67   60 3.7021 .6326
    0.312 3.876 13.97     4.0273 .6126
    0.337 3.826 15.00 XHY 80 4.2713 .5972
    0.438 3.624 19.02   120 5.1790 .5361
    0.531 3.438 22.53   160 5.8997 .4822
    0.674 3.152 27.57 XXHY   6.7927 .4054
5 5.563 0.188 5.187 10.80     4.1161 1.0979
    0.219 5.125 12.51     4.7279 1.0716
    0.258 5.047 14.63 STD. 40 5.4500 1.0391
    0.281 5.001 15.87     5.8644 1.0204
    0.312 4.939 17.51     6.4074 .99647
    0.344 4.875 19.19     6.9358 .9696
    0.375 4.813 20.80 XHY 80 7.4300 .9449
    0.500 4.563 27.06   120 9.2534 .8495
    0.625 4.313 32.99   160 10.7976 .7590
    0.750 4.063 38.59 XXHY   12.0954 .6734
6 6.625 0.109 6.407 7.59   5 3.5769 1.6748
    0.134 6.357 9.30   10 4.3475 1.6488
    0.156 6.313 10.79     5.0107 1.6260
    0.188 6.249 12.94     5.9351 1.5937
    0.203 6.219 13.94     6.3804 1.5780
    0.219 6.187 15.00     6.8261 1.5620
    0.250 6.125 17.04     7.6905 1.5306
    0.280 6.065 18.99 STD. 40 8.4958 1.5008
    0.312 6.001 21.06     9.3416 1.4688
    0.344 5.937 23.10     10.111 1.4391
    0.375 5.875 25.05     10.893 1.4082
    0.432 5.761 28.60 XHY 80 12.224 1.3541
    0.500 5.625 32.74     13.711 1.2909
    0.562 5.501 36.43   120 14.9806 1.2346
    0.625 5.375 40.09     16.1821 1.1787
    0.719 5.187 45.39   160 17.8243 1.0977
    0.864 4.897 53.21 XXHY   20.025 .9784
    1.000 4.625 60.13     21.7719 .8727
    1.125 4.375 66.14     23.1237 .7809

ASTM A333 Grade 6 Pipe Dimensions

A333 Grade 6 Pipe Exporter

Amardeep Steel is a trusted exporter of high-quality A333 Grade 6 Pipe, supplying clients worldwide with products that meet diverse industrial needs

Mexico, Afghanistan, Italy, Switzerland, Czech Republic, Algeria, Angola, Brazil, Poland, Colombia, Slovakia, Trinidad & Tobago, Tunisia, Chile, Bahrain, Iran, Indonesia, Libya, Croatia, Austria, Norway, Estonia, Belarus, Philippines, Mexico, China, Hungary, Iraq, Jordan, Bolivia, South Africa, Australia, Chile, Israel, Bhutan, Hong Kong, Germany, Poland, Kazakhstan, Spain, Macau, Pakistan, Sri Lanka, Lebanon, Namibia, Sweden, Qatar, Kuwait, Canada, Gambia, Greece, Ukraine, United Arab Emirates, Puerto Rico, Turkey, New Zealand, Oman, Netherlands, Venezuela, Finland, Argentina, United Kingdom, Yemen, Nigeria, Nigeria, Portugal, India, South Korea, Tibet, Malaysia, Peru, Russia, Denmark, Ghana, Singapore, Bulgaria, Iran, Morocco, Ecuador, Gabon, Costa Rica, Azerbaijan, United States, Taiwan, Belgium, Lithuania, Thailand, Bangladesh, Japan, Egypt, Saudi Arabia, Mongolia, Romania, France, Serbia, Ireland, Nepal, Vietnam, Kenya, Zimbabwe.

ASTM A333 Gr 6 Pipe Exporter

Amardeep Steel is a prominent exporter of ASTM A333 Gr 6 Pipe Exporter, delivering high-quality products to a diverse clientele across major cities in Europe and beyond

Ukraine, Costa Rica, Macau, Bulgaria, Afghanistan, Ghana, Nigeria, New Zealand, Qatar, Taiwan, Morocco, Nepal, Malaysia, Portugal, Bolivia, Belgium, South Korea, Finland, Argentina, Azerbaijan, Kazakhstan, South Africa, Iran, Namibia, Chile, Bhutan, Israel, Yemen, Puerto Rico, Turkey, Croatia, Austria, Poland, Netherlands, Mongolia, Sweden, United Kingdom, Belarus, Germany, Colombia, Iraq, Gabon, Poland, Spain, United States, Ecuador, Philippines, Oman, Angola, Italy, Kenya, Lithuania, Lebanon, Gambia, Russia, Hong Kong, Ireland, Sri Lanka, Venezuela, Czech Republic, Romania, Greece, United Arab Emirates, Mexico, Bangladesh, Thailand, Australia, Estonia, Singapore, Indonesia, Mexico, Switzerland, Chile, Norway, Pakistan, Bahrain, Hungary, Slovakia, Egypt, China, Jordan, Serbia, Peru, Trinidad & Tobago, Tunisia, Kuwait, Zimbabwe, Algeria, Japan, Canada, France, India, Iran, Tibet, Libya, Nigeria, Vietnam, Saudi Arabia, Denmark, Brazil.

FAQs

1. What is the thickness of the ASTM A333 Grade 6 pipe wall?

The wall thickness of ASTM A333 Grade 6 pipes ranges from 3mm to 12mm, with pipe sizes available from ½ inch to 36 inches.

2. What is the yield strength of the A333 Grade 6 pipe?

ASTM A333 Grade 6 pipe, commonly used for low-temperature services above -45℃, has a minimum yield strength of 240 MPa and a tensile strength of 415 MPa.

3. What is the difference between A106 and A333 pipe?

The difference between A106 Grade B and A333 Grade 6 pipes lies in their manufacturing methods. A106 Grade B pipes are typically produced using the seamless method, while A333 Grade 6 pipes can be manufactured using either seamless or welded methods.

Our Products

Our Main Market