EN 10219 S235JRH SEAMLESS PIPES AND TUBES DEALER, S235JRH EN 10219 CARBON STEEL PIPES, 1.0039 STEEL SQUARE TUBE, EN 10219 S235JRH COLD FORMED SEAMLESS PIPE AND TUBE, EN 10219 S235JRH WELDED STEEL PIPE, S235JRH MATERIAL, S235JRH EN 10219 CARBON STEEL SEAMLESS PIPES AND TUBING MANUFACTURER & EXPORTER IN INDIA.
.jpg "EN 10219 S235JRH Tubes")
S235JRH EN 10219 carbon steel pipes are available in a variety of diameters, forms, and qualities. S235JRH is the most popular grade and is suited for typical building projects such as building frames and structural support systems. Higher grade pipes, like S355J2H or even ASTM A53, could be employed in larger-scale projects that require more strength and durability.
S235JRH is the grade, and the sizes span from 20*20mm to 400*400mm. The wall thickness of the EN10210 S235JRH Seamless Pipe spans from 0.5mm to 25mm, and the length ranges from 6000 mm to 14000 mm. S235JRH EN 10219 Pipes and Tubing are available in welded, seamless, and ERW configurations. The material can be finished in a variety of ways, including black or uncoated self-colored, varnish or oil coated, pre-galvanized or hot dip galvanized. EN 10219 S235JRH Steel Pipe is highly resistant to corrosion.
S235JRH RHS material can also be used in general technical applications. We supply materials in different dimensions, forms, and sizes as one of the leading EN S235JRH Square Pipe Manufacturers. Please contact us with any orders or enquiries.
Chemical Structure Of EN 10219 S235JRH
| Steel Grade |
Type of deoxidation |
% by mass, maximum |
||||||
|---|---|---|---|---|---|---|---|---|
|
steel name |
steel number |
C |
SI |
Mn |
P |
S |
Nb |
|
|
S235JRH |
1.0039 |
FF |
0.17 |
1.4 |
0.04 |
0.04 |
0.009 |
|
Mechanical Strength Table Of EN10219 S235JRH Seamless Pipe
| Steel Grade |
Minimum Yield Strength MPa |
Tensile Strength MPa |
Elongation |
Impact Energy |
|||
|---|---|---|---|---|---|---|---|
|
Steel name |
Steel number |
thickness(mm) |
thickness(mm) |
% (min) |
(KV J) (min) |
||
|
≤ 16 |
16> to ≤40 |
≤3 |
> 3 ≤40 |
≤40 mm |
test temperature |
||
|
S235JRH |
1.0039 |
235 |
225 |
360-510 |
360-510 |
24 |
20℃ |
Material Equivalent Table Of S235JRH EN 10219 Pipes And Tubing
| Steel grade |
Maximum CEV for
nominal thicknesses ≤40mm
|
|
|---|---|---|
| Steel name | Steel number | |
| S275JRH | 1.0149 | 0,40 |
Standard Quality Specification Of Cold Formed EN 10219 S235JRH Square Hollow Section
| Seamless Pipe Size | 4 to 219mm W. T.: 0.5 to 20mm |
|---|---|
| Standard | GB, IS, JIS, ASTM, ASME, AISI, DIN, EN Pipe |
| Welded Pipe Size | 5.0 mm – 1219.2 mm |
| Tube Swg & Bwg | 10 Swg.,16 Swg., 12 Swg., 14 Swg., 20 Swg., 18 Swg. |
| Seamless Tube Size | 3.35 mm OD To 101.6 mm OD |
| EFW Pipe size | 5.0 mm – 1219.2 mm |
| Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
| Pipe Schedule | SCH40, SCH40S, STD, SCH80, XS, SCH60,SCH5, SCH10, SCH10S, SCH20, SCH30, SCH80, SCH120, SCH140, SCH160, XXS |
| Welded Tube Size | 6.35 mm OD To 152 mm OD |
| Length | Single Random, Double Random, Standard & Cut length Pipe & Tube |
| wall thickness | 0.020" –0.220", (special wall thicknesses available) |
| Form | U’ bent or Hollow,Round, Hydraulic, ‘ LSAW, Straight Pipe, Boiler, Clad Pipe, Rectangular, Square Pipe Etc |
| Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF |
| Material Test Certificates (MTC) | Material Test Certificates (MTC) as per EN 10204/3.1B, EN 10204 3.1 and EN 10204 3.2,
100% Radiography Test Report, Raw Materials Certificate, Third Party Inspection Report, Fumigation Certificates, Heat Treatment Charts, En 10297-1 E355 Carbon Steel Pipe HS Code Commercial Invoice, Form A for Generalized System of Preferences (GSP) |
| Type | Welded, Seamless, ERW, EFW, Fabricated Pipe, ‘U’ bent or Hollow, Hydraulic, LSAW, Boiler, Straight Tube, Tube Coil, Round, Rectangular, Square Tube etc |
| End | Plain End, Beveled End, Treaded Pipe & Tube |
| Application | Oil Pipe & Tube, Gas Pipe & Tube, Fluid Pipe & Tube, Boiler Pipe & Tube, Heat exchanger Tube |
| Value Added Service | Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc. |
| Marking | All EN 10297-1 Grade E355 Carbon Steel Seamless Tubes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) |
| Specialize in |
|
| Manufacturers of |
|
S235JRH EN 10219 Carbon Steel Seamless Tubes Sizes
| Wall | Sizes ( O.D.) |
|---|---|
| .010 | 1/16" , 1/8" , 3/16" |
| .020 | 1/16" , 1/8" , 3/16" , 1/4" , 5/16" , 3/8" |
| .012 | 1/8" |
| .016 | 1/8" , 3/16" |
| .028 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 3/4" , 1" , 1 1/2" , 2" |
| .035 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 7/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
| .049 | 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/8" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
| .065 | 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 3/4" , 2" , 2 1/2" , 3" |
| .083 | 1/4" , 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 7/8" , 2" , 2 1/2" ,3" |
| .095 | 1/2" , 5/8" , 1" , 1 1/4" , 1 1/2" , 2" |
| .109 | 1/2" , 3/4" , 1" , 1 1/4" , 1 1/2" , 2" |
| .120 | 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 2" , 2 1/4" , 2 1/2" , 3" |
| .125 | 3/4" , 1" , 1 1/4" , 1 1/2" , 2" , 3" , 3 1/4" |
| .134 | 1" |
| .250 | 3" |
| .375 | 3 1/2" |
Our Products
